MF-F2436-4TL Continuous glass tempering furnace

Continuous glass tempering furnace 1.high output 2.saving-energy 3.safety 4 be used for processing the glass

 Continuous tempering furnace     

SPECIFICATINS

I. Technical Performance

Maximum area of glass sheets array: 4MM-19MM  2440MM×3660MM

Minimum size of glass for processing: 100MM × 250MM or φ250MM 

   2.    Thickness of glass for processing: 4 - 19 mm

   3.    Maximum area of glass for processing: 8.6 square meters  per tempering cycle

                                               8.9 square meters  per glass sheet

   4.    Production Rate: high-quality float flat glass specified by GB11614-1999, four-side edges ground. No holes or chamfer are allowed.

Thickness	4	5	6	8	10	12	15	19
No. of tempering cycle per hour	18	15	13	10	7	5	3	2

     Note: The productivity may be reduced by 10-30% in the following cases:

When the length of an individual piece of glass exceeds 3050mm;For low-E glass; andFor glasses of other special size, processing requirement or performanceYield Rate: 97%Glass Varieties to be Produced: Ordinary glass, pattern glass, reflective glass, color glazed glass and coated Low-E (Radiance Value: e≥0.06) glassEnergy Consumption: For 5mm flat glass sheets that are to be tempered and whose occupation rate inside the hearth is above 75%, the energy consumption per square meter is equal to or less than 4kw.h.

   II. Main Technical Parameters

1.     Equipment External Dimension: 18075mm(L)×6950mm(W)×3500mm(H) (the fanning mill is set after the machine)         

2.     Installed Capacity: 

              Power Supply: Three-phase 380V; Five-wire 50 Hz

              Gross Power: 870KW

Picture

parts of machine

part of control system

products

MF-F2436-4TL Continuous glass tempering furnace