High quality MF-F2436-4TL Glass cutting machine

Glass cutting machine 1 protected with safty guards. 2 cheap to the cost 3 power-saving

glass cutting machine      MF-F2436-4TL 

 SPECIFICATIONS 

 I. Technical Performance 

The performance of the product described in the following text conforms to that made of the high-quality float glass specified by national standards in GB11614-1999 Float Glass.

Note: (1) The thickness of  glass should be ≥2.85MM

     (2) Four-side edges of the glass should be ground by diamond wheel until being beveled. No hole or chamfers are allowed.

1. Maximum area of glass sheets array: 2.85MM - 19MM  2000MM × 4000MM

2. Minimum size of glass for processing: 100MM × 250MM or φ250MM

3. Maximum size of individual glass sheet for processing:

    2.85 MM       600MM× 1000MM

    3 MM      800MM× 1200MM

    4-6MM      2000MM× 4000MM

    8-19 MM      2000MM × 4000MM

 Clearance of glass sheets array: longitudinal ≥50mm; transverse ≥20mm 

4. Thickness of glass for processing: 2.85 - 19 mm

5. Maximum area of glass for processing: 8 square meter per tempering cycle

                                               8 square meter per glass sheet

II. Main Technical Parameters

1.     Equipment External Dimension: 18075mm(L)×6950mm(W)×3500mm(H) (the fanning mill is set after the machine)         

2.     Installed Capacity: 

              Power Supply: Three-phase 380V; Five-wire 50 Hz

              Gross Power: 870KW

Picture

1 equipment of part:

2 equipment of  part:

 3 sample:

High quality MF-F2436-4TL Glass cutting machine